1. May 2024
 
|
 |
VH 350
 | VH 300 and VH 350 are small tandem vibratory rollers with an articulated frame and two smooth drums with a finished surface. Both drums are driven and vibrating. VH 250 K is a combined vibratory roller with an articulated frame. The front axle consists of a smooth vibratory drum with a machined surface, the rear axle is fitted with four rubber-tired compaction wheels with a smooth tread. Both axles are driven. Vibration sources are one stage non-rectified vibration exciters placed in the drum axis. The drive of all machine functions is hydrostatical. The machine is equipped with Deutz engine, hydraulic Hydromatic-Rexroth. It fulfils the requirements of pollutants emission directives 97/68/ECE Stage 2 and EPA/CARB Tier 1. It meets the CE marking conditions. |
| STANDARD: | Operator platform without cabin with rails Lockable bonet Lockable vandal guard Suspended operator´s platform Forwards/backwards adjustable seat Slideable seat Seat with contact switch Both drums vibrating Transport lashing and lifting eyes front, rear Two scrapers per drum Plastic water tank One mode vibrators Operator can switch off/on a front/rear vibration Pre selectionof the travel and vibration Vibration control in travel lever Both axes are hydrostatiically driven Working halogen headlights Painting STA: yellow, grey | | OPTIONS: | |
| CAPACITY: | | Operating weight (CECE) | kg | 3.335 | | Compacting width maximum | mm | 1300 | | Drum offset | mm | 0 |
| | WEIGHTS: | | Operating weight maximum | kg | 3.480 | | Front drum load (CECE) | kg | 1.660 | | Rear drum load (CECE) | kg | 1.675 | | Front drum linear load | kg/cm | 12,8 | | Rear drum linear load | kg/cm | 12,9 |
| | STEERING: | | Steering angle (+ -) | ° | 33 | | Oscillation angle(+ -) | ° | 10 | | Turning radius inner | mm | 2.250 | | Turning radius outer | mm | 3.600 | | Transversal stability - straight | ° | 30 |
| RIDING CHARACTERISTIC: | | No. of travel speeds | 1 | | Maximal speed | km/h | 10 | | Gradeabiliy without vibration | % | 30 | | Gradeability with vibration | % | 33 |
| BRAKES: | | Operation | hydrostatic | | Parking | multi disc | | Emergency | multi disc |
| VIBRATION: | | Amplitudes | mm | 0,45 | | Frequencies | Hz | 53 / 62 | | Centrifugal forces | kN | 29,4/40,3 |
| WATERING: | | Watering | pressure | | No. of pumps | 1 | | Water filtration stages | 2 |
| TANKS: | | Fuel | lt | 72 | | Watering water | lt | 227 |
| ELEKTROINSTALLATION: | | Voltage | V | 12 | | Capacity of batteries | Ah | 72 |
| ENGINE: | Make | Deutz | Type | F3L1011F | Rated power | kW | 27,5 |
|
| PARAMETERS: size (mm) | | A | D | G | H | H1 | H2 | L | T | W | W1 | W2 | | 1.715 | 746 | 310 | 2.560 | 1.825 | 612 | 2.640 | 16 | 1.300 | 1.396 | 45 |
| | | 
| | | | Technical modifications and data reserved. Machines may be shown with options. | | |
| | Maximal compacted lift thickness at optimal working conditions (m) | | Asphalt | Sand / Gravel | Mixed soils | Silt | Stabilization | | 0,12 | 0,30 | 0,20 | - | 0,15 |
| | |
|
|
Ammann Czech republic, a.s.